ARIETE Vapori aspira Instrucciones De Empleo página 55

interno_GB 14-09-2004
The clip (B) must also be turned to fix the extension
tubes in place.
Glass wiper (I)
The glass wiper (I) is ideal for large windows and
mirrors as well as for smooth surfaces in general.
The glass wiper can be connected to the nozzle (A)
using one or both of the extension tubes (C), or it
can be inserted directly onto the handle (A6).
To lock or release this attachment on the tubes or
handle, it is necessary to turn the clip (B) after inser-
ting the attachment on the relevant coupling point.
The clip (B) must also be turned to fix the extension
tubes in place.
To use the glass wiper correctly, proceed as follows:
• Dispense steam evenly over the surface to be
cleaned in order to dissolve the dirt.
• Press the rubber glass wiper against the surface
to be cleaned, moving it vertically, from top to
bottom, with the vacuum function enabled.
CAUTION: When cleaning glass surfaces
during particularly cold periods of the year,
pre-heat them by dispensing steam at an ini-
tial distance of 50 cm from the surface itself.
15:43 Pagina 53
53