Important Remarks - DIMOEL DIMO700 Manual De Instrucciones

1 - IMPORTANT REMARKS

m
Prior to proceeding with installation, it is essential the
instructions be read in full, since they contain important
information regarding safety, installation, use and
maintenance.
AUTOMATION MUST BE IMPLEMENTED IN COMPLIANCE
WITH THE EUROPEAN REGULATIONS IN FORCE:
EN 13241-1:2016 (Industrial, commercial, garage doors and
gates. Product standard, performance characteristics
EN 12453:2017 (Safe use of automated locking devices,
requirements)
• The installer must provide for a device (es. magnetotermical
switch) ensuring the omnipolar sectioning of the equipment
from the power supply. The standards require a separation of
the contacts of at least 3 mm in each pole (EN 60335-1).
• Also the automation upstream electric system shall
comply with the laws and rules in force and be carried out
workmanlike. The manufacturer declines any responsibility in
case of automation upstream electric system not complying
with the laws and rules in force and not carried out
workmanlike
• When hitting an obstacle the door has to stop and reverse.
If the gate does not slide on the requested path or if it
does not change its sliding direction as soon as it detects
an obstacle, you need to readjust the obstacle detection
sensitivity. Then please repeat the test.
If the door after the performed corrections does not stop and
reverse according to the valid norms, the door may not be
operated automatically.
• The use of DIMO700 in dusty, saline or explosive environment
is forbidden
• The opener is designed for operation in dry rooms exclusively
• For the safety and life of persons it is absolutely necessary to
follow all instructions.
• Keep these instructions save for later reference
• Do not permit children to play with the automated garage
door. Transmitters are to be kept safe and away from children!
• Only operate the door if the entire door area is in your field of
view. Always be sure, that no persons or objects are located
within traveling range of the door
• Do not use the opener when service or adjustment work
is required. A badly balanced door, or a faulty garage door
system may cause injuries.
• Please inform all persons using the door system on how to
operate it correctly and safely.
• Check often the automation, particularly the cables, springs
and mechanic parts for wear and tear, damages and
unbalancing.
• The plug must be at easy reach, after the installation.
• The data on the plate of the product are written on the label
put next to the connection terminal board.
• Any control devices installed in fixed locations (such as buttons
or similar devices) must be positioned within the field of view
of the gate, at a height of at least 1.5m from the ground.
It is essential that they are mounted out of reach of children!
The manufacturer has the right to modify the product
without previous notice; it also declines any responsibility
to damage or injury to people or things caused by improper
use or wrong installation.
- 14 -