Setting The Close Limit Switch; Self Learning Of The Forces; Adjusting The Sensitivity; Open Alarm - DIMOEL DIMO700 Manual De Instrucciones

9.2 - SETTING THE CLOSE LIMIT SWITCH

+
-
+
Press the key,
2
the display shows

9.3 - SELF LEARNING OF THE FORCES

+
-
+
Press the key,
3
the display shows
m
PLEASE NOTE: On completion of the procedure, it is
possible to exit the programming procedure, storing the
parameters set: press and hold the
until the segments of the display illuminate one at a time
0
until showing
9.4 - OPEN ALARM (DEFAULT: 0 – FUNCTION DEACTIVATED)
If this function is activated, the device emits BEEPs for 30 seconds when the door remains open for longer than 10 minutes. The alarm is
repeated every 10 minutes. Close to door to interrupt the alarm.
+
-
+
Press the key,
6
the display shows
+
-
Press the key:
2
flashes
+
-
Press the key:
3
flashes - the door opens
key for 5 seconds
+
-
0
Press the key: flashes
to indicate that the
function is deactivated
- 22 -
+
-
Press and hold the
+
(the door opens)
-
or (the door closes)
key to reach the fully
close position
+
-
When the door stops, press
the key to confirm.
Press the key once
more to continue - the
door closes
+
-
+
Press the key to activate
the function: the display
I
shows
+
-
When the door reaches the
closed position press the
key to save the settings
+
-
When the door stops, press
the key to save the
settings.
3
The display shows
+
-
Press the key to save
the settings.
6
The display shows