Wall Switch Operation; Setting Up And Pairing Your Alexa Bath Fan To The Homewerks Connect App - Homewerks 7148-01-AX Manual Del Usuario

WALL SWITCH OPERATION

Button
• Short press to turn light ON/OFF
• Long press for 8 seconds to initiate the switch pairing process
• Short press to adjust brightness
• Short press to mute Alexa microphone ON/OFF
• Long press for 5 seconds to activate BLUETOOTH
• Short press to activate Alexa
• Long press for 5 seconds to start or restart the Wi-Fi pairing process
• Short press to turn fan ON/OFF
• Long press for 8 seconds to activate a factory reset
• Short press to turn light and fan ON/OFF together
• Long press for 3 seconds to power ON/OFF
CAUTION: If you long press the (
NOTE: If the wall switch does not work with the bath fan, press the (
to initiate the switch pairing process.

SETTING UP AND PAIRING YOUR ALEXA BATH FAN TO THE HOMEWERKS CONNECT APP

Occasionally, there are updates to the app which may change the steps below. If you are having any difficulty with the
steps below, please go to Homewerks.com/HomewerksConnectApp to check for updates.
1. Connect your phone or smart device to a steady 2.4 GHz Wi-Fi connection that can be accessed where your bath
fan will be installed.
2. Download the Homewerks Connect app from your smart device compatible app store. If you don't have
an Amazon Alexa account, download the Amazon Alexa app from the app store and choose "Create a
new account".
3. If using IOS, open the Amazon Alexa app and log in to your Amazon Alexa account with your User ID and Password,
then click "Sign In". IMPORTANT: If using Android, this step is not needed.
4. Turn on the bath fan at the LED wall switch by pressing the (
The bath fan grille will light up.
5. The bath fan speaker will say "Now in set-up mode". If you do not hear "Now in set-up mode", long press the (
button on the LED wall switch for 5 seconds to enter set-up mode.
6. Open the Homewerks Connect app on your smart device and follow the instructions provided in the app.
7. In the Homewerks Connect app, select "Add device" and then "Next."
8. Click "Indicator is Blinking" and the app will search for the bath fan. Once the app has discovered the bath fan,
identified as BATHROOM, click "Set up this device".
9. Set up Wi-Fi for the bath fan by entering the password for the same 2.4 GHz Wi-Fi signal your smart device is connected
to and click "Next". The app will then connect the bath fan to Wi-Fi. Once the bath fan is connected to Wi-Fi, click "Next".
10. The Homewerks Connect app will now search for and install the latest version of the firmware. Please be patient while the
firmware is updated to provide you with the best experience.
11. A list of available names will appear in the app and BATHROOM will be selected as the default setting. Click "Next"
in the upper right corner of the app screen to proceed to the next step.
12. Now the Homewerks Connect app will need you to log in to your Amazon Alexa account. Click "Get Started," then
enter the User ID and Password for your Amazon account. Select "Keep me signed in" and then click "Sign In".
13. After logging in to Amazon, choose your preferred language.
14. When the next Amazon Alexa screen says "Alexa is ready", click "Next" and then "Next" again to initiate the pairing
process.
15. After pairing the bath fan to the app, the commands in this step will activate the special skills needed to control additional
functions of the bath fan. Click "Connect" on the next screen. Connect the Homewerks Smart Fan skills by clicking "Link".
Then click "Link" again. To finish the process, click "Done" and "Done" again. IMPORTANT FOR ANDROID USERS: After
clicking "Connect" and "Link", the app will need you to log in to your Amazon Alexa account again.
You have successfully completed the set-up process and your Homewerks SmartVent fan is ready for use. You can now speak
your commands or questions to Alexa, control the fan via the Homewerks Connect app, or use the included wall switch!
Homewerks.com
Action
) button on the LED wall switch, you will need to repeat the setup process.
pairing
®
) button on the wall switch for 8 seconds
) button for at least 3 seconds, until you hear a click.
9
)