Delivery Inventory; Explanation Of Symbols - Dolmar LT-30 Manual De Empleo Y De Seguridad

Delivery inventory

1. Brushcutter
2. Handle
(version depends on model)
3. Harness
(MS-30 U, MS-30 C only)
4. Guard
(cutting attachment guard)
5. Cutting tool
(MS-30 U, MS-30 C= 4-tooth star blade; LT-30 = 2-line trimmer head)
6. Tool protection
(MS-30 U, MS-30 C only)
7. Offset screwdriver
8. 17 mm wrench for cutting tool installation
9. Winding guard
(LT-30 only)
10. Instruction Manual
(not shown)
The spark plug tool (wrench 0.75" (19 mm)) is not included with the delivery inventory!
Order no. see Accessoires.
If one of these parts is missing when you unpack the brushcutter, contact your dealer!

Explanation of symbols

You will notice the following symbols on the brushcutter and in the instruction manual.
Read the Owner's and Safety Manual
and follow all warnings and safety
instructions
Particular care and
caution
Forbidden!
Wear protective gloves!
Wear safety shoes!
Wear eye, face and hearing protection!
(eye protection must comply with
ANSI Z87-1)
The distance between the machine and
bystanders shall be at least 50 feet!
DANGER:
Beware of thrown objects!
Do not use metal blades!
Do not use saw blades!
3
(MS-30 U, MS-30 C only)
!
!
1
2
max.
10000 / min
STOP
RE Y
Shown: MS-30 U
9
8
7
6
4
CAUTION: Kickback!
(blade thrust)
Maximum tool rpm
Choke
Start engine
Stop engine!
No smoking!
No open flame!
Fuel and oil mixture
First aid
Recycling
5
3