Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Blade Replacement
1. Use a Phillips head screwdriver to remove the screws that hold the upper cover in order to ac-
cess the cutting blade.
2. Remove the 2 screws (M6 fasten screws) where the Blade Holders will go on the blade carrier.
3. Attach the Blade Holders and securely tighten by hand.
4. Remove the remaining screws that hold the blade in place.
5. Carefully pull the blade outwards then reverse the whole process to replace with a new blade.
- 17 -
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
