Programming In Quick Mode - Tamerica TPI-4900E Manual De Usuario

Programming in Quick Mode

This program is used to conveniently cut a large document down to popular US paper sizes such as
Letter (8.5"x11"), Legal (8.5" x 14"), Tabloid (11" x 17") and Ledger (17" x 11") without the
need to input any values. For example, if you want to trim your document to Letter size, simply
press the designated key. Before proceeding to cut, remember to:
1. First check the position of the back gauge to see if it is at 11.00". In this example, it is cur-
rently at 19.29". Press the first value to make the TPI-4900E adjust to the correct size then
press the 2 cut buttons to operate the blade.
2. If you want to add another value, press that number followed by Edit then input your value.
3. To push your document out, simply press the Push key. This will remain illuminated meaning
the cutter will automatically push your document out for succeeding cuts. Pressing it again
once will do the opposite.
NOTE: The Back Arrow key will simply return you to the previous screen.
Align documents here
- 8 -
Press 2 cut buttons simultaneously