ION Bright Max Manual Del Usuario página 5

Ocultar thumbs Ver también para Bright Max:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Bluetooth Connecting with Bright Max
Connecting to one Bright Max
1. Power on the Bright Max
will automatically enter Bluetooth pairing mode.
2. Navigate to your device's Bluetooth setup screen, find Bright Max, and connect. When
connected, the Bluetooth LED will be lit solid blue and you will hear "Connected".
Note: Do not connect to Bright Max_BLE; this is reserved exclusively for connecting to
the ION Sound XP
Device" on your Bluetooth device and try to connect again.
3. To disconnect, turn off Bluetooth from your device's Bluetooth settings, or press and hold
the Bluetooth button.
Syncing multiple Bright Max
1. Connect to one Bright Max
speaker.
2. Double-press the Bluetooth button on the primary speaker to enter Multi-Sync
Bluetooth LED will change from blue to solid white to indicate it is in Multi-Sync
Note: Bright Max
closer the speakers are, the faster they will sync.
Note: To exit Multi-Sync
3. Power on any other speakers. Press and hold the Bluetooth button on the secondary
speakers to disconnect any currently connected Bluetooth sources.
4. Double-press the Bluetooth button to enter Multi-Sync
The Bluetooth LED will begin flashing green and the secondary speakers should
automatically sync to the primary speakers.
5. Once a successful sync is established, the Bluetooth LED on the secondary speaker will be
lit solid green, and you will hear "Synced" from the "secondary" speaker.
Note: The Bluetooth range will be determined by the distance that your Bluetooth device is to
the "primary" speaker. See
TM
Tip: Bright Max
can sync audio with other Multi-Sync
find out more, visit ionaudio.com.
TM
Speaker:
TM
by holding down the Power button for 2 seconds. Bright Max
TM
app. If you experience trouble in connecting, select "Forget this
TM
Speakers:
TM
speaker using the steps above. This will be the "primary"
TM
speakers should be within 100' (30 m) of each other to properly sync. The
TM
mode, double-press the Bluetooth button again.
Technical Specifications
TM
TM
Mode for the secondary speakers.
for Bluetooth and Multi-Sync
TM
-compatible ION Audio speakers. To
TM
TM
mode. The
TM
mode.
TM
ranges.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido