Battery Cabinet Connections; Remove The Chassis Shell - Tripp-Lite BP240V65 Manual Del Propietário

5. Installation

5.5 Battery Cabinet Connections:

Models BP240V65L, BP240V65L-NIB,
BP240V100L and BP240V100L-NIB
Each battery cabinet design includes built-in internal battery
connection cables, breaker, fuses and terminals. The standard
cabinet can hold 20 pieces of 12V 65Ah (12V/100Ah) batteries.
The "L" long-runtime battery cabinets can hold 40 pieces of the 12V
65Ah (12V 100Ah) batteries. The DC voltage system for all cabinets
is 240VDC with ±120V internal battery strings.
Figures 5-23 and 5-24 show the overall chassis design and
exploded views for the BP240V65L, BP240V65L-NIB, BP240V100L
and BP240V100L-NIB models. The corresponding views for the
BP240V65, BP240V65-NIB, BP240V100 and BP240V100-NIB
models are shown in section 5.4 Battery Cabinet Connections:
Models BP240V65, BP240V65-NIB, BP240V100 and
BP240V100-NIB.
Figure 5-23: BP240V65L, BP240V65L-NIB, BP240V100L,
& BP240V100L-NIB Battery Chassis
5.5.1 Remove the
Chassis Shell
Place the battery box its final location.
Remove the top, front, left and right
panels. Remove the right and left cover
plates of the battery pack and the battery
supports to install the batteries strings.
Figure 5-24: Exploded View – Models BP240V65L, BP240V65L-NIB, BP240V100l, BP240V100L-NIB
32