Grundfos Conex DIA-1 Instrucciones De Instalación Y Funcionamiento página 49

11.10.2 Manual operation with configured limit contact and continuous controller
"Man"
controller
stop
Fig. 39 Manual operation with configured limit contact and continuous controller
Manual operation with configured limit contacts is
largely similar to manual operation with two-position
controllers. See section 11.10.1 Manual operation
with configured two-position and continuous
controllers.
The difference: When the desired relay output is
selected, the relay can be switched on or off.
manual operation
0.01
mg/l
1. Press [OK] to start the controller.
– The display shows the controller control display
in its dependence on the switching state of the
relay or in dependence of the selected dosing
flow with continuous control.
See section 11.6.5 Controller control fields on the
display.
manual
operation
1 2
5.20 pH c
22 °C
c
on
relay 1/2
off
cont.controller
dosing flow
0-100 %
49