Vertical Steam Ironing - GE 898693 Manual Del Usuario

Water spray
noTEs:
• This function can be used to help iron heavy fabrics or difficult areas (collars,
pockets, sleeves, creases, etc). It can also be used when ironing delicate fabrics,
which cannot be steam ironed.
• This feature only works when water has been filled into the tank (20). If the spray
is being used for the first time, or if the iron has been idle for some time, you may
need to press the spray button
it works correctly.
• Aim the spray nozzle (1) at the garment and then press the spray button
A spray of water is emitted from the spray nozzle (1) (ill. i ).
•
steam burst
noTE: This function provides an extra amount of steam to remove stubborn creases.
For extra stubborn creases, wait a few seconds before pressing the steam burst
button (7) again. You may need to press the steam burst button
prime the pump before it works correctly. We recommend pressing it every 5 seconds.
• Press the steam burst button
• A burst of steam is released from the soleplate nozzles (21) (ill.

Vertical steam ironing

CAuTion! burn Hazard: Do not direct steam toward people or pets. This function
provides an extra amount of steam to remove creases on delicate garments in a
hanging position, hanging curtains or other hanging fabrics. During use, do not let the
soleplate (21) touch delicate fabrics!
• Prepare the iron for steam ironing ( Steam ironing).
• hold the iron vertically and keep it about 6 inches (15cm) away from the garment
to be ironed.
• Press the steam burst button
garment to remove creases (ill. k ).
898693-Iron-EN-04.indd 9
OPERATION (CONT.)
(6) a few times to prime the spray pump before
(7).
(7). Now, steam bursts out and penetrates into the
9
(6).
(7) a few times to
j
).
2/9/12 4:58 PM