Cleaning And Maintenance - GE 898693 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING AND MAINTENANCE

self-cleaning
This function removes scale and mineral build-up in the steam chamber.
Fill the iron to half its capacity with water ( Filling iron with water).
Connect the power plug (11) to a suitable electrical outlet.
Slide the function control (5) to the dry ironing
Press the temp. button (4) on either side of the iron until the cotton-linen indicator
(14) flashes (ill. d ).
Place the iron on its heel (10) and let it heat up (ill. e ). The cotton-linen
indicator (14) flashes until the selected temperature has been reached.
After the cotton-linen indicator (14) lights up steadily, press the temp. button (4)
(ill. d ) until the off indicator (18) lights up. Disconnect the iron from the electrical
outlet.
Slide the function control (5) to the steam ironing
hold the iron over a sink with one hand, and press and hold the self clean
button (19) continuously with the other hand. CAuTion: Boiling water with steam
and impurities is ejected from the soleplate nozzles (21).
Gently move the iron back and forth.
Release the self clean button (19) when the water tank (20) is completely empty.
Cleaning the iron
Do not use harsh abrasives, chemical cleaners or solvents to clean the casing of
your iron, as these will damage its surface.
To clean the occasional build-up of scale on the soleplate (21) and the casing, just
wipe with a soft damp cloth.
Always store the iron in an upright position on its heel (10) (ill. e ).
storage
Before storage, make sure to turn the iron off and empty the water tank (20)
( Turning iron off and emptying water tank).
Let the iron cool and dry completely.
Store the iron in a dry and cool place. To avoid accidents, ensure that both the iron
and its power cord (11) are beyond reach of children or pets.
898693-Iron-EN-04.indd 11
position (ill. g ).
position (ill. h ).
11
2/9/12 4:58 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido