Cleaning And Maintenance - Redmond SkyKettle RK-M173S-E Manual De Usuario

4. To interrupt the water heating process repress
from the base.
If the temperature in the kettle is higher than the desired heating temperature the
heating process won't be enabled.
To switch to the „Heated boiling" mode during heating process press
Heated boiling
This mode allows keeping the selected temperature (40-90°С) for up to 2 hours.
If the temperature will drop lower than the selected value, the heating element will
be automatically enabled.
1. Press . The heating process will start, 100°С indicator will appear on the
top of the display.
2. Press button during water heating. The button indicator will start blinking.
The heating temperature value will be flashing on the top of the display.
The current temperature value of water is displayed at the bottom of display.
3. Use "+" and "–" buttons to adjust the temperature value if necessary (in 5°С
interval). It can also be adjusted while the kettle is in the heating mode. In a
few seconds after the end of adjustment the temperature value on the top of
display will switch to 100°С.
4. After water comes to a boil an audible signal will be heard and appliance will
switch to the heating mode. The temperature value indicator and
display will be lit up solid in this mode, and also
5. The appliance will automatically switch to standby mode in 2 hours.
6. To interrupt the boiling and switch to the heating repress
able the heating after boiling repress
remove the kettle from the base.
Safety system
• The kettle is equipped with the system of auto shut-off upon boiling or remov-
ing from the base.
• In case of lack of water in the kettle or water shortage the automatic overheat
protection will be activated. An audible signal will be heard and the appliance
will be automatically disconnected.
To enable indication remove the kettle from the base. Wait till it completely
cools down. Then the appliance will be ready for operation.
Control panel lock
To provide extra safety the appliance is equipped with control panel lock function. It
prevents accidental pressing the buttons. To enable/disable the lock in the standby press
10
button and remove the kettle
button.
on the
indicator will be lit.
button. To dis-
button. To interrupt the operation
and indicators will be displayed.
"+" button, and, holding it, press button. An audible signal will be heard. If any button
is pressed in the lock mode, "+" and button indicators will be lit on the control panel.
Non-volatile memory
The kettle is equipped with a non-volatile memory unit. In case temporary power cut occurs
during water heating or boiling all user' s settings are saved to the memory of the appliance.
When power supply is resumed the kettle will automatically continue its operation.
III. CLEANING AND MAINTENANCE
Unplug the kettle and allow it to cool before cleaning.
DO NOT use a sponge or tissue with hard or abrasive surface or abrasive pastes. Do
not use any chemically aggressive substances or any other agents which are not
recommended for cleaning items that come into contact with food.
ATTENTION! Before repeated usage make sure that the electrical contacts are kept dry!
Base and body cleaning
Clean the kettle body and base with a soft cloth. Dry the kettle before operation.
ATTENTION! Never immerse the kettle, the base, the power cord or the socket in
water: the electrical contacts should not contact with water.
Descaling
During operation, depending on the composition of usable water, oxide spots and scale
can appear on the heating element and inner walls of the appliance. To remove them:
1. Pour water into the kettle ¾ from maximum capacity and bring it to a boil.
2. After the kettle turns off, add 8% acetic acid solution to the maximum level
on the inner surface of the body.
3. Leave this solution inside the kettle for several hours.
4. Empty the kettle and rinse properly.
5. Fill the kettle with clean water up to the maximum level on the inner surface
of the body and bring it to a boil.
6. Empty the kettle and rinse it again. If scale still remains, repeat the procedure
mentioned above.
You can also use special means for descaling. Follow the manufacturer's instructions
in this case.
To clean removable scale filter
1. Open the lid. Remove the filter pulling it upward.