Publicidad
Idiomas disponibles
Idiomas disponibles
1. Lower muffler – Using an exhaust hanger removal tool or pry bar, lower muffler by removing (3) to (5) rubber hangers (varies by model year). A spray a lubricant or
soapy water on rubber hangers makes them slide off metal pins more easily.
before removing rubber hangers.
2. Remove heat shield – Using a 10mm socket, remove (4) screws holding
heat shield(s) to vehicle.
NOTE:
to installing hitch.
©2017 Cequent™ Performance Products, Inc. - Printed in Mexico
Shield will be trimmed and replaced prior
NOTE: Using a ratchet strap or bungee cord, b
3. Remove rubber plugs - using a flat screw driver, remove (3) rubber plugs
from the (3) forward holes in the bottom of the frame. Do not remove the
rearmost rubber plug.
Sheet 4 of 21
e sure that exhaust is supported
24960NP
3-21-17
Rev. A
Publicidad
