Sauder 410287 Manual Del Usuario página 19

Step 14
1
D132
Groove
å
Insert the DRAWER SIDES (D132 and D138) at
an angle into the slot at each end of the RIGHT
DRAWER FRONT (Q2).
3
M65
Surface with
Q2
HIDDEN CAM
å
Fasten the DRAWER BRACE (M65) to the
DRAWER FRONT (Q2). Tighten one HIDDEN CAM.
www.sauder.com/services
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D138
Q2
Maximum
Arrow
210 degrees
Minimum
190 degrees
Hidden part using
recycled material.
Color may vary.
VIEW THE T-LOCK BOX VIDEO
2
D132
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
å
Slide the DRAWER BOTTOM (D975) into the grooves in
the DRAWER SIDES (D132 and D138) and RIGHT
DRAWER FRONT (Q2).
4
D167
D132
M65
å
Fasten the DRAWER BACK (D167) to the DRAWER
SIDES (D132 and D138) and DRAWER BRACE (M65). Use five
BLACK 1-9/16" FLAT HEAD SCREWS (30S). Repeat
this step for the other DRAWERS using the DRAWER
FRONTS (Q2 and R2). Use the SMALL DRAWER FRONTS (K2
and L2), SMALL DRAWER SIDES (D10 and D11), and SMALL
DRAWER BACKS (D166) for the small drawers.
410287
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
U n fi
n i s h
s u r
e d
f a c
e
D975
D138
Q2
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(30 used in this step)
Be sure the
DRAWER
D138
BOTTOM
inserts into
the DRAWER
BACK groove.
Page 19