lauson OM83 Manual De Instrucciones página 4

LAUSON
OPERATION
- INSTALL THE DUST COVER INTO
THE REAR HINGES.
AFTERWARDS, SET THE
TURNTABLE PLATTER ONTO
THE CENTER SPINDLE.
ATTACH THE DRIVE BELT ON
-
THE MOTOR PULLEY. THE BELT
IS TIGHTENED UNDER THE
TURNTABLE PLATTER.
INSERT THE HEADSHELL INTO
-
THE FRONT END OF THE
TONEARM, THEN SCREW THE
LOCK NUT FIRMLY WITH THE
HEADSHELL
- SLIDE COUNTERWEIGHT ONTO
THE TONEARM. TWIST IT
LIGHTLY AND IT WILL SCREW
INWARDS ONTO THE REAR END
OF THE TONEARM.
HOW TO INSTALL DIFFERENT
CARTRIDGES:
A) HOLD THE COUNTER WEIGHT
-
WITH ONE HAND, TURN SCALE RING
TO "0" AGAINST THE INDEX LINE ON
THE SHAFT WITH ANOTHER HAND,
BE SURE NOT TO TURN TOGETHER
WITH THE COUNTERWEIGHT
B) FOR THE DEFAULT AUDIO-TECHNICA AT-3600L CARTRIDGE, FOLLOW THE STEPS ABOVE
-
(A). THEN TURN THE COUNTERWEIGHT INWARD TILL THE "0" ON THE SCALE RING AGAINST
THE HORIZONTAL LINE AGAIN. THEN CONTINUE TO TURN THE COUNTERWEIGHT INWARD
TILL "2" TO "2.5" ON THE SCALE RING AGAINST THE INDEX LINE.
C) FOR OTHER CARTRIDGE, USER CAN ADJUST THE TRACKING FORCE BY TURNING
-
COUNTERWEIGHT INWARDS OR BACKWARDS. TURN THE COUNTERWEIGHT INWARD TILL IT
REACH THE HORIZONTAL LINE. THEN FOLLOW THE FIRST STEPS (A).
OM83
TURNTABLE
4
EN