Infiniton WM-K10IN Manual De Usuario página 57

Operate Washing Machine
View of control panel
■
Cycle Selector
Function
■
·On/Off Button: Press once to turn the washing machine on, press again
to turn the washing machine off. If the washing machine power is left on
for longer than 10 minutes without any buttons being touched, the power
automatically turns off.
·Start/Pause Button: Press the button once to start a cycle.Press the
button a second time will pause the operating cycle. During a pause,
setting and options can be modified and selected again if it is permit.
Pressing the button again will resume the active cycle.
·Cycle Selector: The knob can be turned in either directuon to choose a
cycle.
·Temperature Button:Use the button to select a water
temperature.Available selections (from cold to max ºC) vary for each
cycle.The targeted setting will blink on the screen during the selection
process.
·Speed Button:Use the button to select a spin speed.Available selections
(from 0 to max rpm)vary for each cycle.The targeted setting will blink on
the screen during the selection process.
·Delay Button: Press the button repeatedly to cycle through the available
delayed start options (from 3 to 24 hours in one hour increments).
·Wash Button: Use this button to select a wash time (from 0 to max min).
Available selections vary for each cycle.The targeted setting will appear
on the screen during the selection process.
·Rinse Button: Use this button to select time for rinsing.Available
selections(from 0 to max timnes)vary for each cycle.The targeted setting
will appear on the screen during the selection process.
Delay Button
Wash Button
Rinse Button
Speed Button
Temperatture Button
11
On/Off Button
(Note: press for three seconds)
Start/Pause Button