Maintenance - Infiniton WM-K10IN Manual De Usuario

Ocultar thumbs Ver también para WM-K10IN:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Features
3.Unbalance protection: When the machine is ready to spin, The washer
may take a few time to balance clothes due to great unbalance. If clothes
is still unbalance in the drum after that, the spinning speed can be slow
down to avoid great vibration. If clothes in drum is too less, the machine
may not to spin due to the unbalance protection, then you should add
more clothes in the machine to make it to spin.
4.Reload:If you want to add clothes in the washer during the procedure,
press the "Start/Pause" button for 3s,when you sound two beeps, it
means the reload feature has been activated. Please wait for the
indicator ' ' disappears then open the door. Press the "Start/Pause"
button to resume the procedure after reload.

Maintenance

Proper maintenance on the washing machine can extend its work life.
WARNING
Before your maintenance starts, please do pull out the power plug or
disconnect power and close the tap.
Clean internal drum
The rusts left inside the drum by the metal articles shall be removed
immediately with chlorine-free detergents. Never use steel wool.
Clean surface
1.If there is any water overflow, use the dry cloth to wipe it off
immediately. No sharp items are allowed to strike the washer.
2.The surface can be cleaned with diluted non-abrasive neutral
detergents when necessary.
Clean the drain pump
1.Disconnect the washing machine;
2.Open the Pump case cover with a
coin or a key;
3.Unscrew the pump cover anticlockwise,
Always keep a rag nearby to dry
up water when unscrewing the
pump cover;
4.Clean the inner of the pump;
5.Replace the pump
cover and screw it
tightly;
6.Replace the Pump
case cover.
3
14
1
2

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido