Technical Specifications - Infiniton SD-8NDP El Manual Del Propietario

MAINTENANCE
！ Warning!
• Only authorised technicans can carry out repairs.
• Before you call service, please check if you have dealt with the
fault yourself or if you have followed the user instructions.
• A technician will charge you for advice, even during the warranty period.
Problem
• Check if the power supply works.
•Display does not on
• Check if the mains plug is inserted.
• Check the selected programme .
• Press the 【On/Off】button.
• Empty water container.
• " "is lighting
• If the light is still on, please call the service.
• Clean heat exchanger.
•" "is light ing
• Clear lint filter.
• Check the
• Check the programme has set.
•Dryer does not start
• Check the start button has selected.
• Clean lint filter and
• Empty container.
•Degree of dryness was not
• Check drain hose.
reached or drying time too
• Dryer installation place is too restricted.
long
• Clean the moisture sensors.
• Keep the Air inlet clean.
• Use higher drying intensity level programme or
time programme.
！ Warning!
If you cannot deal with the fault by yourself and need help:
• Press the 【On/Off】button.
• Pull out the mains plug and call the service.
Solution
the door has closed.
heat exchanger .
21
MAINTENANCE

Technical Specifications

Model SD-8NDP
Parameter
Dimension(L*W*H) 615*595*845(mm)
+5°c ~ +35°c
Ambient temperature
Rated input power
2700W
Rated voltage
220-240V~
Rated frequency
50Hz
Weight of product 41kg
Rated capacity 8.0kg
Note!
•
The rated capacity is the maximum capacity, make sure that the dry clothes which are
loaded to the appliance do not exceed the rated capacity each time.
•
Do not install the tumble dryer in a room when there is a risk of frost occurring. At
temperatures around freezing point the tumble dryer may not be able to operate
properly.
•
There is a risk of damage if the condensate water is allowed to freeze in the pump,
hoses and / or condensate water container.
22