Programme End - Infiniton SD-8NDP El Manual Del Propietario

OPERATIONS
4
5
On/Off
1 1
Product is switched on or off.
1 2 Start/Pause
Press the button to start or pause the
drying cycle.
Specialty function
3
These buttons are used for setting
additional functions.
3 2
Display
4
This display shows the setting, estimated
remaining time and status messages of
your dryer.
Programmes
5
Different Dryer cycle can be selected
according to the user's needs to make the
clothes have more effective drying results.
13
OPERATIONS
1
Programme selector
1.Press the【On/Off 】 button ,when the LED display screen brightens up, rotate
the programme knob to select the desired programme.
2.Select the【Delay】,【Time】,【Intensity】,【Speed Dry】,【Signal】or
【Anti-Crease】 functions for additional option.
3.Press the【Start/Pause】button.
Programme start
The drum will keep rotating after the programme starts, the state light in the
display area will flash in sequence, the remaining time displayed will change
automatically.

Programme end

1.The drum will stop running after the programme ends,
the display will show "
dryer will start
1 minute (refer to page 15). Please press
pull the plug out.
2.Deal with the problem accroding to "Malfunction display and solutions , if
there is a unexpected stop during the drying procedure and the dryer show
information(refer to page 20 ).
Delay start
Speed dry indicator
Anti-crease mode
Remaining Time indicator/Error message
Cycle phase status
Clean filters (warning)
Empty water container (warning)
Dryness level (four grades)
Signal indicator
", the last cycle phase status light will flash. The
【 】function
Anti-crease if user doesn't remove the load in
【On/Off】
14
Time
Child lock
My cycle
the buzzer will beep,
key to cut off power and
"