Publicidad
3 Pull out the network cable through the rear of the Ceiling Mount in to the pipe.
4 Attach the Ceiling Mount on the Mount Plate using the screw bit included.
5 Loosen the 2 screws shown in the figure below to adjust the length of the Ceiling
Mount.
`
After adjusting the length, tightly fasten the screw to secure it.
TR30
6 After aligning the installation direction guides of the camera and Ceiling Mount,
push the main cover upward and turn it counterclockwise until it is secured.
`
Install the camera according to the camera's installation guide.
TR30
7 Tightly fasten the 3 mounting screws on the Ceiling Mount.
8 Using the Hex. L Wrench, loosen the screw shown in the figure below to adjust
the direction of the camera.
`
After adjusting the direction, tightly fasten the screw to secure it.
* The Ceiling Mount contains a Hanging Mount. You can remove the Hanging Mount
to use it separately, or you can install another mount or camera that has a screw
thread of 1.5" PF to the Ceiling Mount.
Product Specifications
Product Name
TR30
Supported product
Color / Material
RAL Code
Product dimensions
/ weight
Product Overview
SBP-156CMW
XNP-9300RW / XNP-8300RW / XNP-6400RW
* models can be added without notice
White / Aluminum
RAL9003
Φ180 x 1,435 mm (Φ7.1 x 56.5") (Max.)
/ 4.2 kg (9.3 Ib)
mm[inch]
PT01-005683A
Publicidad
