Publicidad
When installing on a wall
3-1 Install the mount plate on a wall using the hexagon socket head screw (4 pcs)
included.
`
When installing the product on a wall, mark and drill 4 holes into the Mount
plate and insert the Hexagon socket head screws before installation.
The side engraved with 'TOP (POLE)' should face the wall when installed.
`
Install the product so that the arrow on the opposite side engraved with 'TOP
(WALL)' points upward.
3-2 Insert the network cable through the Mount plate.
Depending on some installation conditions, this product can be connected to
`
0.75" PF which is a screw peak processed pipe.
There are three directions available for inserting the pipe.
Mount plate
Hexagon socket head screw
When installing on a round pillar
3-1 Select a pole to install and confirm the installation height.
3-2 Use the Stainless Steel Mounting Strap to secure the Mount Plate to the pole.
`
The side engraved with 'TOP (WALL)' should face the round pillar when
installed.
Install the product so that the arrow on the opposite side engraved with 'TOP
(POLE)' points upward.
3-3 Insert the network cable through the Mount Plate.
Mount plate
4 Attach the mount plate on the bottom cover of the Wall & Mount using the driver
bit included.
Cable Clamp
5 After aligning the installation direction guides of the camera and Wall&Pole
Mount, push the main cover upward and turn it counterclockwise until it is
secured.
`
Install the camera according to the camera's installation guide.
Stainless steel mount strap
(Optional accessory)
Screw
Bottom cover
6 Join the top cover of the Wall&Pole Mount.
Mount plate
Product Specifications
Product Name
SBP-156WMW
XNP-9300RW / XNP-8300RW / XNP-6400RW
Supported product
* models can be added without notice
Color / Material
White / Aluminum
RAL Code
RAL9003
Product dimensions
135 x 183 x 302 mm (5.31 x 7.20 x 11.89")
(WxHxD) / weight
/ 1,517 g (3.34l Ib)
Product Overview
mm[inch]
PT01-005643A
Publicidad
