KENMORE ELITE 796.4148 Serie Manual De Uso página 27

Shouldyouexperience any problems with your
washingmachine, i t hasthecapabilityof transmitting
data via yourtelephone to the Kenmore Connect
Team. T hisgivesyouthe capabilityof
speaking
directly to our specially trained technicians. The
technician records the data transmitted from your
machine and uses it to analyze the issue, providing a
fast and effective diagnosis.
Using the Kenrnore Connec|
TM
System
If you experience problems with your washer, call
1-800-4-MY-HOME ®. Only use the Kenmore Connect
System feature when instructed to do so by the
Kenmore Connect Team. The transmission sounds that
you will hear are normal and sound similar to a fax
machine.
Kenmore Connect cannot be activated unless your
washing machine is turned on by pressing the POWER
button. If your washing machine is unable to turn
on, then troubleshooting must be done without using
Kenmore Connect.
First, call 1-800-4-MY-HOME ® (1-800-469-4663). if the number of the phone you are using is on file and is associated
with your washer, you will be quickly relayed to a Kenmore Connect(TM) Team agent. Only use the Kenmore Connect(TM)
feature when instructed to do so by the Kenmore Connect(TM) Team agent.
HOLD
the mouthpiece of your phone over the POWER button, when instructed to do so by
the call center, no more than one inch from (but not touching) the machine.
NOTE: Do not press any other buttons or turn the cycle selector knob.
PUSH
and hold the WASH TEMP button while continuing to hold your phone to the
POWER button.
LISTEN
for three beeps. After you hear the three beeps, release the WASH TEMP button. A
tone transmission will begin. Keep the phone in place until the tone transmission has finished.
This takes about 6 seconds, and the display will count down the time. Once the countdown is
over and the tones have stopped, resume your conversation with the technician, who will then
be able to assist you in using the information transmitted for analysis.
NOTE:
* For best results, do not move the phone while the tones are being transmitted.
"if the call center agent is not able to get an accurate recording of the data, you may be
asked to try again.
"Pressing the POWER button during the transmission will shut off: Kenmore Connect.
27