Urmet AIKO 1716 Manual Del Usuario página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
CODE: user code.
Set a number from 0 to 127, according to the following rules:
In the column there must not be any apartments with the same user code.
If there are apartment stations in parallel in the same apartment, these must have the same user code.
The user codes of the same column must be consecutive.
§
To set the desired code, use the dip switches from 2 to 8 (2= most signifi cant bit - 8= less signifi cant
bit); the dip-switch 1 must be set to OFF.
INT: apartment internal code.
Set a number from 0 to 3, according to the following rules:
If in the apartment there is only one station, the internal code must be set to 0.
In apartments, up to 4 apartment stations in parallel with the same user code and different internal codes
can be connected.
The internal code identifi es each station of the same user. This means that intercom calls can be addressed
to the single internal code in the same apartment.
In case of intercom calls to different apartments, in case of calls coming from door units and in case of fl oor
call, all the user apartment stations always ring. Consider also the following information:
after receiving a call, the internal code 0 rings immediately; the internal codes 1, 2 and 3 ring in
sequence.
If the call comes from a video call station, the internal code 0 turns the monitor on.
However, the other apartment stations of the same user can press the button
phone, turning off the other ('video transfer' function).
LINE TERMINATION SETTING
Line termination
ON
On the video door phone there is a jumper which allows to insert the line termination. The termination must
be activated in all the devices installed at the end of a line that does not start again with another segment
from the terminal pins LINE OUT:
LINE OUT
LINE OUT
LINE IN
LINE 3
LINE 1
1083/55
LINE 4
LINE 2
LINE IN
14
to turn their video door
OFF
Termination
ON
Termination
ON
Termination
LINE OUT
OFF
LINE 3
1083/55
LINE 4
LINE IN
CLEANING
Clean the video door phone with a damp cloth, wiping gently the screen.
FEATURES
CALL RECEPTION AND 'VIDEO TRANSFER' FUNCTION
When a call is received, the user apartment station rings with the programmed tone, according to the
source:
From main door unit
From secondary door unit
From Intercom
From fl oor call
From switchboard
When the door phone or video door phone call is received, it is always possible to activate the door unit
electric lock also without activating the communication.
If in the apartment there are several apartment stations in parallel, the stations ring in sequence. The user
internal code 0 also performs the video door phone power-on, if the call comes from a video door phone
call station. In this case, during the off-hook waiting time (60s from the call), the other internal codes can
turn their video door phone on by pressing the auto-on button
the video door phones of the called user answers.
If the image is already displayed, press the button
control cameras of the caller station only.
After the audio activation, the image coming from the main camera will be displayed only on the screen of
the answering apartment station.
Therefore the camera image will be displayed on one apartment station at a time.
ANSWERING THE CALL
By pressing the button
blinking). By pressing again the button, the communication is closed and the display turns off.
DOOR LOCK RELEASE DURING A CALL AND OPEN DOOR INDICATION
After a call is received from a door unit or during the communication with a door unit, the pedestrian or
driveway gate can be opened by pressing the buttons
If the call modules are provided with open door sensor (and the absence service is not active), the led
Termination
can indicate if the door is really open or not: the led lights up steady if the open door is the main one, and
ON
blinks if the open door is the secondary one.
RINGER LOUDSPEAKER MUTE
This function allows to disabled the call ringer. To activate this function, press the button
function is activated, the led MUTE
LINE 1
LINE 2
ADDITIONAL RINGER
The video door phone is provided with two terminal pins (S+, S-) for the connection of an additional ringer
or a relay. This ringer is activated with any call ring.
DS1716-001B
DS1716-001B
('video transfer' function), until one of
to cyclically display images coming from other
, the user establishes a communication with the caller (the button pressed starts
and
turns on and when a call is received, the device will not ring.
respectively.
. When the
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1716/11716/22voice aiko

Tabla de contenido