Battery Replacement; Liability Disclaimer - TFA 98.1035 Instrucciones Para El Manejo

TFA No. 98.1035 Anleitung 06.11.2006 14:53 Uhr Seite 8
ANALOG
– Radio controlled projection clock with weather station
6. Positioning of display unit and transmitter
• Choose a shady and dry position for the transmitter. ( Direct
sunshine falsifies the measurement and continuous humidity
strains the electronic components needlessly)
• Place the Display Unit at the final position. Avoid the vicinity
of any interfering field like computer monitors or TV sets and
solid metal objects.
• Check the transmission of 433 MHz signal from the transmit-
ter to the Display Unit (transmission range 60 m free field).
Within ferro-concrete rooms (basements, superstructures), the
received signal is naturally weakened.
• If necessary chose another position for transmitter and/or dis-
play unit.
• Fix the transmitter by using plastic hanger.

7. Battery Replacement

• When the batteries are used up, low battery icon appears at
the indoor or outdoor temperature row.
• Use alkaline batteries 1.5 V AA only. Observe correct polarity.
Attention: Do not dispose of empty batteries in household
waste. Take them to special local collection sites.
8. Notes
• Always read the users manual carefully before operating the
unit.
• Avoid placing the clock near interference sources / metal
frames such as computer or TV sets.
• Do not expose the instrument to extreme temperatures, vibra-
tion or shock.

9. Liability Disclaimer

• The product is not a toy. Keep it out of reach of children.
• The product is not to be used for medical purpose or for
public information, but is determined for home use only.
• Improper use or unauthorized opening of housing will mean
the loss of warranty.
• No part of this manual may be reproduced without written
consent of manufacturer.
14
ANALOG
– Radio controlled projection clock with weather station
EC-DECLARATION OF CONFORMITY
Product: PCR622 / PCR622EL ( Kat. Nr. 98.1035 )
This product contains the approved transmitter and complies with the
essential requirements of Article 3 of the R&TTE 1999/5/EC Directives, if
used for its intended use and that the following standard(s) has/have
been applied:
Efficient use of radio frequency spectrum (Article 3.2 of the R&TTE
Directive)
applied standard(s)
Electromagnetic compatibility (Article 3.1.b of the R&TTE Directive)
applied standard(s)
EC-Declaration page Electromagnetic compatibility
applied standard(s)
Low voltage directive
applied standard(s)
applied standard(s)
Additional information:
The product is therefore conform with the Low Voltage Directive
73/23/EC, the EMC Directive 89/336/EC and R&TTE Directive
1999/5/EC (appendix II) and carries the respective CE marking.
RTTE Compliant Countries:
All EU countries, Switzerland CH and Norway N
QA MANAGER : H.Y.WANG
K.S plastic factory
Guan Lan / Shen Zhen / China
0125
EN 300 220-1,3:2000
EN 301 489-1,3:2000
EN 300 339 : 1998
EN 60950-1 : 2001
EN 50371 : 2002
15