Environmental Protection - Ratio PRO XF20-P Manual De Instrucciones

charger and allow your battery pack to cool first
to ambient temperature and then recharging can
be started. If you charge a second battery pack
immediately after the first then the charger can
be overheated. Always allow at least 15 minutes
rest between battery pack charging.
3. REASONS FOR DIFFERENT BATTERY
PACK WORKING TIMES
Charging time problems, having not used a
battery pack for a prolonged time will reduce the
battery pack working time. This can be corrected
after several charge and discharge operations by
charging & working with your drill. Heavy working
conditions such as large screws into hard wood
will use up the battery pack energy faster than
lighter working conditions. Do not re-charge your
battery pack below 0oC and above 30oC as this
will affect performance.
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
or maintenance. There are no user serviceable
parts in your power tool. Never use water or
chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of
dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authorities or retailer for recycling
advice.
42
GUARANTEE
This product has been manufactured to the
highest standards. It is guaranteed against
faulty materials and workmanship for at least 12
months from purchase. Please keep your receipt
as proof of purchase. If the product is found to
be defective within the duration of the guarantee
period, we will either replace all defective parts
or, at our discretion, replace the unit free of
charge with the same item or items of a greater
value and /or specification.
This warranty is invalid where defects are caused
by or result from:
1.Misuse, abuse or neglect.
2. The tool has not been used for rental
purposes.
3.Repairs attempted by unauthorised repair
centres.
4.Damage caused by foreign objects, substances
or accident.
Ehlis S.A.
c/. Sevilla s/n. Polígono Industrial Nord-Est
08740 Sant Andreu de la Barca Barcelona-
España