Picture Menu - Sony MFM-HT75W Manual Del Usuario

Picture menu

You can adjust the following items using the "Picture" menu.
• Mode
• Backlight
• Contrast (Picture)
• Brightness
• Color
• Hue
• Sharpness
• Color Temp.
• Gamma
• Picture Mode Reset
• NR
• Dynamic Picture
Tip
The "Backlight," "Contrast," "Brightness," "Color," "Hue," "Sharpness,"
"Color Temp.," and "Gamma" menus can be set for each Picture mode.
Also, Picture Mode can be set for each available input.
x Selecting the Picture Mode for PC 1/PC 2
You can select the appropriate screen brightness for your purpose.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Picture" menu appears on the screen.
3 Press the M/m buttons to select "Mode" and press
the OK button.
The "Mode" menu appears on the screen.
Picture
Mode:
Backlight:
Contrast:
Brightness:
Color:
Hue:
Sharpness:
Color Temp.:
Gamma:
Picture Mode Reset
NR:
Dynamic Picture:
Select
4 Press the M/m buttons to select the desired mode
and press the OK button.
The default setting is "Movie."
• Game: Bright picture.
• Movie: Clear picture with strong contrast.
• PC:
Soft tone picture.
• Auto: Automatically adjusts the screen brightness
according to the brightness of the surroundings
(automatic brightness adjustment function). For
more information, see "Automatic brightness
adjustment function (light sensor)" on page 31.
Note
When the Picture Mode is set to "Auto," you cannot adjust the backlight.
20
Picture DVI-D: PC 1
Mode: Movie
Backlight: 100
Contrast: 70
Brightness: 50
Color:
Hue:
Sharpness:
Color Temp.: 9300K
Gamma: Gamma4
Picture Mode Reset
NR:
Dynamic Picture:
1280 x 1024/60 Hz
Select Set Exit
(Picture) and
DVI-D: PC 1
Game
Movie
PC
Auto
9300K
Gamma4
1280 x 1024/60 Hz
Set
x Selecting the Picture Mode for TV/VIDEO 1/
VIDEO 2
You can select the appropriate screen brightness for your purpose.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Picture" menu appears on the screen.
3 Press the M/m buttons to select "Mode" and press
the OK button.
The "Mode" menu appears on the screen.
Picture
Mode:
Backlight:
Picture:
Brightness:
Color:
Hue:
Sharpness:
Color Temp.:
Gamma:
Picture Mode Reset
NR:
Dynamic Picture:
Select
4 Press the M/m buttons to select the desired mode
and press the OK button.
The default setting is "Vivid."
• Vivid: Picture with enhanced contrast and sharpness.
• Standard:Picture with contrast that suits the room light.
• Eco: Picture with low brightness.
• Auto: Automatically adjusts the screen brightness
according to the brightness of the surroundings
(automatic brightness adjustment function). For
more information, see "Automatic brightness
adjustment function (light sensor)" on page 31.
Note
When the Picture Mode is set to "Auto," you cannot adjust the backlight.
x Adjusting "Backlight"
If the screen is too bright, adjust the backlight to make the screen
easier to see.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Picture" menu appears on the screen.
3 Press the M/m buttons to select "Backlight" and
press the OK button.
The "Backlight" menu appears on the screen.
4 Press the M/m buttons to adjust the light level and
press the OK button.
(Picture) and
: TV
Vivid
Standard
Eco
Auto
50
0
7
Off
Off
Set Exit
(Picture) and