HAMPTON BAY 743-253 Manual De Instrucciones página 7

Mounting Holes align with the Mounting Holes of the Swivel Bar (???). Thread the Canopy
Mounting Screws into the Canopy Mounting Holes to secure the Canopy onto the Swivel Bar
and flush against the ceiling. Place the Canopy (#8) of the Fixture over the Outlet Box (#3)
and onto the Fixture Mounting Screws (#7), and adjust the Fixture Mounting Screws (#7) until
they protrude out from the Canopy (#8) 1/4". Remove the Canopy (#8) and secure the position
of the Fixture Mounting Screws (#7) by tightening the Hex Nuts (#6) against the Mounting
Bracket (#4). Place the Canopy (#8) back onto the Fixture Mounting Screws (#7), and secure it
into place using the Lock Nuts (#9) provided.
7. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch
on to activate the fixture.
Page 7