Aerator
3. Installation Checkout
Turn both handles full clockwise to the off position to close the
valves.
Verify that all connections are tight.
Twist the aerator counterclockwise to remove it from the spout.
Position a bucket, or other suitable container, beneath the spout.
Turn on the main water supply.
Check all connections for leaks; repair as needed.
Open both faucet valves to run water through the faucet.
Check all connections for leaks; make any adjustments as needed.
Allow water to run through the spout to remove any debris.
Turn off the faucet by closing both valves.
Remove any debris from the aerator and reinstall.
1047606-2-B
6
Kohler Co.