WARNING: Risk of fire or electric shock. Do not alter, relocate or remove wiring, lampholders, power
supply or any other electrical component.
WARNING: Risk of fire or electric shock. LED retrofit kit installation requires knowledge of the
construction and operation of the luminaires' electrical systems and the hazard involved. If not qualified,
do not attempt installation. Contact a qualified electrician.
WARNING: Risk of fire or electric shock. Install this kit only in the luminaires that have the construction
features and dimensions in photographs and/or drawing.
WARNING: Do not make or alter any open holes in an enclosure of wiring or electrical components
during installation.
Suitable for use with luminaires with a minimum of 75°C supply conductors.
The retrofit kit is accepted as a component of a luminaire where the suitability of the combination shall be
determined by CSA/UL or authorities having jurisdiction.
Page 2 of 6
SPEC. NO. 93054065 2-22-16