MSA FASIT Gallet F1 XF Manual De Funcionamiento página 5

2.3 Certifications/Approvals/Technical Specifications
The helmet meets the 89/686/EEC directive and is certified according to EN 443:2008. Depending on
the individual helmet configuration, optional EN 443:2008 requirements may be marked on the helmet,
as explained below:
Standards and Directives for Helmet
Certification
agency
Standards and
directives:
Type B
Type B3b
E2
E3
*** / **
C
Marking
(Wheelmark):
Standards and Directives for Visors
Certification
agency
Standards and
directives:
(+)
-30 °C; 120 °C
A
T
AT
K
N
2C-2.5 and 2C-1.2 UV Filtering according to EN170:2002
- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 -
INSPEC Ltd (0194), 56 Leslie Hough Way, Salford,
Helmet
Greater Manchester, M6 6AJ, United Kingdom
89/686/EEC Personal protection equipment
EN 443:2008 "Helmets for firefighting in buildings and other structures".
Indicates the protection zone assured by the helmet (area 1a -1b).
Indicates the extended protection zone assured by the helmet (area 1a-1b and 3b)
Indicates the electrical insulation of the damp helmet.
Indicates a non-conductive surface of the shell.
Indicates protection at low temperature down to -30°C/ -20°C
Indicates a resistance to liquid chemical products. (sulphuric acid, sodium
hydroxide,
p-xylene, butan-1-ol, n-heptane)
Meets 96/98/EC Marine Equipment Directive (MED)
INSPEC Ltd (0194), 56 Leslie Hough Way, Salford,
Face shield:
Greater Manchester, M6 6AJ, United Kingdom
DEKRA EXAM (0158), Dinnendahlstr. 9,
Ocular visor
D-44809 Bochum
89/686/EEC Personal protection equipment
EN 14458:2004 Personal eye equipment
Conforms to the additional requirements of firefighters
Visor type: Eye guard
Visor type: Face guard
Extremes of temperature to which the visor has been tested (-30 °C & +120 °C)
Complies with the electrical properties
Resistance to high energy impact 190 ms-1
Resistance to medium energy impact at extremes of temperatures
Resistance to high energy impact (190ms-1) at extremes of temperature
Resistance to abrasion according EN 168: 2001, clause 15
Resistance to fogging
Description
www.fasit.it - info@fasit.it
GB
5