Maintenance And Cleaning - MSA FASIT Gallet F1 XF Manual De Funcionamiento

Maintenance and Cleaning

4.5 Mask Adapter (Kitfix)
Attach a mask using the "Kitfix" connector kits A.
5 Maintenance and Cleaning
The length of the useable life of this helmet will be affected by the type(s) of material used in its
construction and the environments in which the helmet is used and stored. Recommendations on this
topic should be sought from the manufacturer.
WARNING!
Do not apply paint, stickers, cleaning products with a hydrocarbon base or solvents to the helmet or
visors to prevent damaging the materials of your helmet.
GB
To maximize helmet lifetime:
• Store the helmet in a proper storage bag and/or in a closed cabinet to avoid extended exposure
to cold, humidity, exhaust fumes, etc.
• Clean the helmet (shell and internal components) after use before storing.
Checks After Each Use
After each use, check every part of the helmet and especially all the fixing points:
• Correct anchor points used
• No evident wear
• No fractures or cracks
Check that the helmet fit is always correct.
12
- Via Orsera 13/b - 34145 TRIESTE - ITALY - Tel +39 040 825604 -
To adjust mask tightness on helmet:
(1) Use a pair of pliers to remove the pin.
(2) Adjust the Kitfix to position (1) (2) or (3) (according to desired
mask tightness).
(3) Use the pin to lock the Kitfix in place (push it in completely).
(4) Test mask seal after attaching the mask if necessary.
Do not drop the helmet.
Prevent the helmet from impacts which could damage the shields (cracks/scratches).
The parts in contact with skin have to be inspected regularly for cracks or wear that could
cause discomfort. Changing those parts regularly will maintain user comfort level.
www.fasit.it - info@fasit.it