Tripp-Lite B032-HUA2 Manual Del Propietário página 8

Operation
Firmware Upgrade Utility-Failed
If the Upgrade Succeeded screen does not appear, the upgrade failed to
complete successfully, in which case you should perform the following:
1. Disconnect the USB connectors on the KVM cables from the computer.
2. Press and hold the Remote Port Selector's pushbutton. While still
pressing the pushbutton, reconnect the KVM cable's USB connectors to
the computer.
3. Power on the B032-HUA2. It will now work with the factory default
firmware. Follow the steps in the Firmware Upgrade Utility section to
upgrade the firmware.
16-11-116-93366A.indb 8
8
12/15/2016 10:43:24 AM