Urmet 1717/11 Manual Del Usuario página 14

Microphone mute condition is disabled by the video door phone when the conversation in
progress is closed.
Door LocK reLeASe AnD oPen Door inDicATion
The pedestrian or the vehicle gate can be opened at any moment (according to door lock release
configuration: free or secret) by pressing the buttons
To switch on the video door phone in standby mode, press the button (7).
If the call modules are provided with the open door sensor (and the absence service is not active),
the led can indicate if the door is really open or not: the led is steady on.
STAirS LighT
At any moment, a command to turn stairs lights on by activating a special decoder can be sent by pressing
the button .
To switch on the video door phone in standby mode, press the button (7).
AuDio/ViDeo SeTTingS During cALL
When a call is received or during a conversation, some audio/video adjustments can be performed:
• Press the button
In case of video door phone calls, this menu will be displayed over the image coming from the
door unit, while in case of door phone calls, intercom calls or calls from the switchboard, only the
loudspeaker volume adjustment bar will be available.
• Select the desired value using the buttons + and – near the bar of each parameter:
– Loudspeaker volume,
– Brightness
– Contrast
– Colour
• Press OK to confirm or X to delete the settings.
ADDiTionAL ringer
The video door phone is provided with two terminal pins (S+, S-) for the connection of an additional ringer
or a relay. This ringer is activated with any call ring.
14
, the following screen is displayed
-
-
-
-
and .
+
+
+
+
DS1717-005A