Troubleshooting - Endress+Hauser Solimotion FTR20 Instrucciones De Operación

en - Troubleshooting
64
Fault Reason
Yellow LED off No power or power too low
with bulk solids (green LED does not light up)
in motion
Path of rays covered
(e.g. window dirty)
Wrong installation
Wrong settings
FTR20 defective
Yellow LED FTR20 defective
always on
Strong Turbulent application,
fluctuation of reflections and so on
signal strength
Remedy
Check power supply
Check path of rays and clean
if necessary
Check installation
14
È
Check settings
44
È
Replace device or electronics
Replace device or electronics
Increase signal damping
57
È
Endress+Hauser