Cequent Performance Products 24939 Instrucciones De Instalación página 6

9. Tighten all 7/16-14 GR 5 fasteners with torque wrench to 50 Lb.-Ft.
(68 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing
11. Re-install fascia – Re-attach (2) outside plastic fascia tabs. Re-install
lower fascia starting at center and gently pushing tabs into
corresponding slots. Re-install the screws at lower attaching points.
Reinstall plastic rivets. Return center plastic fascia tab to owner.
©2016 Cequent™ Performance Products, Inc. -
Printed in Mexico
10. Trim lower fascia - Trim lower fascia as shown. See figure 3. Recommend
radius in corners.
2" [50.8]
4" [101.6]
12. Raise exhaust - Raise exhaust back into position and reattach exhaust
hangers disconnected in step 2. Note: Using a spraying a lubricant helps
with reinstallation.
13. Re-install appearance panel - Reinstall the appearance panel removed
in step 1.
Sheet 6 of 18 24939N
2.5"
[63.5]
3-4-16 Rev. A