Operation Keys; Temperature Regulation - Infiniton FGC-817B Manual De Instrucciones

Preparations prior to use
1. Remove all packing assemblies such as case fixing tape etc., especially the foam base.
2. Use warm wet cloth to clean both interior and exterior of the refrigerator, (neutral detergent
can be added in warm water).
3. After leveling and cleaning the refrigerator, stand it for about 2 hours before plugging the
power plug for powering on, and cool the refrigerator for 2 to 3 hours before storing foods.
The appliance should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the
compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down
on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere with
cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many items as needed
at one time, and close the door as soon as possible.

Operation keys

Temperature regulation

--The temperature inside the refrigerator is controlled by
the temperature controller mounted in the refrigerating
chamber, which is provided with 8 gears (0, 1,
2,......7).Temperature controller lighting combination
panel-- The temperature inside the refrigerator decreases
gradually when the temperature control knob is turned
from 0→7; conversely, the temperature increases
gradually;
--The use may set the temperature control knob at different
gears on the basis of refrigerator service environment and
specific situations of stored foods;
--The temperature inside the refrigerator will vary as the
temperature control knob is placed at different gears, and
meanwhile the power consumption will show some
differences;
--Upon overall consideration of preservation effect and
power consumption, the recommended regulated values
are as follows:
2~4 gears in summer, 4 gear in spring and autumn and 4~6
gears in winter.
7
temperature controller
lighting combination panel