Trouble Shooting - Electrex TS 210 AC Manual De Instrucciones

All manuals and user guides at all-guides.com

7 TROUBLE SHOOTING

POSSIBLE CAUSES
RED INDICATORS ARE OFF = NO SUPPLY
ON/OFF main switch is OFF
Power supply cable is cuted
No main supply
Defective ON/OFF main switch
WARMING UP
Duty cycle over rated (if ambient > 25°C)
Insufficient cooling air
Very dusty machine
Fan doesn't start
IMPROPER WELDING
Wrong electrode polarity
Dirtiness in the weld parts
CHECK
Switch it ON
Check cable and connections
Check circuit breaker and fuses
Replace the switch
Let the machine cool, it will automatically start again
Clean the air inlets
Open the generator and blow it through
Replace the fan
Use the right polarity according to the indications of
electrode's manufacturer
Clean and eventually degrease the weld parts
23