Faber e-MatriX Manual Del Propietário página 16

Installation
Placing the Fuel Bed
CAUTION: Never lift the fuel bed without using the
supplied handles.
1.
Lift the fuel bed carefully by the handles.
2.
Connect the electrical plug and sit the fuel bed in
place.
3.
Unscrew the handles from the fuel bed and keep
them for future use.
4.
Place suction cups and replace the front glass.
16
Do not place decorative
material in the center
area.
Front glass only
Rotate the clamp counter-clockwise to lock the
glass into position.
2- or 3-sided glass
Rotate the glass clamp counter-clockwise to lock
the glass into position. .
Place Decoration Material
The supplied artificial ash and chips can be used to
personalize your fire!
CAUTION: Keep decoration material away from
children, persons with reduced physical or mental
capabilities, and animals.
General
www.faberfire.com