Remote Control - Faber e-MatriX Manual Del Propietário

Operation

Remote Control

A multi-function remote control is included. The
remote control has a maximum range of 30 ft (9 m).
Icon
O |
Main switch: Toggle ON/OFF.
1
(1 beep will be heard.)
Press to activate (ON).
2
(1 beep will be heard.)
Press again to turn OFF.
Press multiple times to reduce the
3
flame height.
Press multiple times increase the
4
flame height.
Press multiple times to reduce the
5
fire crackling sound.
Press multiple times to increase
6
the fire crackling sound.
18
Description
Pairing Remote
Connect (pair) the remote control to the control box
and use the remote to turn the fireplace ON/OFF,
adjust the flame height, and adjust the fire crackling
sound volume.
To pair the remote and control box:
1.
Turn the main switch on the control box to the ON
position. (The control box beeps once.)
2.
Press the Main button [
start the fire. (The control box beeps once.)
3
. Press the pairing button [
to start the fireplace. (The control box beeps once
and the icon LEDs blink on and off.)
4.
Press the Main button [
to turn the fireplace off.
When the remote control is paired, check if all the
remote control functions are available from the
desired distance.
5.
If needed, move the receiver to a different
position inside or outside the construction.
!
NOTE: The receiver is located at the back inside
of the fireplace unit. The receiver has a cable
length of 4.4 ft (1.4 m).
] on the control box to
] on the control box
] on the remote control
www.faberfire.com