Starting/Stopping Therapy - ResMed AirSense 11 Serie Manual Del Usuario

Starting/Stopping therapy

WARNING
The machine is not intended to be operated by persons (including children) with reduced physical,
sensory or mental capabilities without adequate supervision by a person responsible for the
patient's safety.
To start therapy:
1. Fit your mask
2. Press the Start therapy/Standby button or breathe normally if SmartStart is enabled
Therapy will begin and the treatment screen is displayed. A dynamic pulse wave will appear during
therapy.
To review your sleep progress, click on
Notes:
• The screen will fade and then go black automatically after a short period of time. Tap the screen to turn
it back on.
•
If power is interrupted during therapy, the device will automatically restart therapy when power is
restored.
•
The device has a light sensor that adjusts the screen brightness based on the light in the room.
To stop therapy:
1. Remove your mask.
2. Press the Start therapy/Standby button or wait until the device stops if SmartStop is enabled.
10
to view more details