The Problem Is That The Printer Has Not Received The Job - HP Designjet 110 plus Guía De Referencia

Ocultar thumbs Ver también para Designjet 110 plus:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

HP Designjet 110plus/110 plus nr printer—

The problem is that the printer has not received the job

If your printer seems to be ignoring the printing job you have sent to it:
1. Check that the printer is correctly connected to the computer.
If the connection is through a network, print the printer's configuration pages
(hold down the Power key while pressing the OK key four times), and check in
the TCP/IP section that the Status is shown as Ready. Make a note of the
printer's IP address and subnet mask, which are in the same section.
• If the IP address is 0.0.0.0 or 192.0.0.192, refer to your printer's setup
poster.
• If the Status is Ready, you can use a Web browser to check the network
connection between printer and computer. Simply type your printer's IP
address into your browser, where you would normally type a URL. If you get
a reply from the printer, then the network connection between the printer
and the computer is working.
• If the Status is Not Ready, or if the printer does not reply to the Web
browser, check that the printer's IP address and subnet mask belong to your
network.
• If necessary, consult your network administrator.
2. Check that the printer queue is not paused.
3. If you are using Mac OS X, make sure you selected "HP IP Printing" when you
created your printer, and not "IP Printing".
Quick Reference Guide
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Designjet 110 plus nr

Tabla de contenido