START
Display panel is located at the door of the cold storage room, interface
display as follows:
Button instruction:
1."Temp.Zone "button-selecting the temperature zone
2."Temp"button-setting the temperature of refrigerator
3."Function"button-setting the refrigerator at fast freeze or Smart status
4."OK" button-To confirm the temperature or function status setting.
5. When the screen lights up, if there is no touch operation, the display
screen dimmed after 3 minutes; when the display is dimmed, the first time
keypad wake-up display, at this time if you press any key in short time, the
key is invalid; after the "unlock" button 3s unlocked, then press the button,
then the function takes effect.
Function setting
★ First power on
When the refrigerator first power on, the control panel will back to normal
display after 2 seconds.
★ Control panel operation
There is no operation on refrigerator when the door closed in 3minutes,the
light of control panel will be off
Open the door or press any button, the light will be on,
★ Setting the temperature of freezer
Press the "Temp.Zone" button till the freezer temperature showed at blink ,
can set the freezer temperature. Press the "Temp" button, the temperature
will change 1℃ with each pressing.
The temperature setting of freezer is circulating as below:
-24℃-- -23℃-- -22℃-- --21℃-- -20℃-- -19℃-- -18℃-- -17℃-- -16℃-- -24℃
Setting the temperature of fridge
Press the "Temp.Zone" button till the fridge temperature showed at blink, can
set the fridge temperature. Press the "Temp" button, the temperature will
change 1℃ with each pressing.
The temperature setting of fridge is circulating as below:
2℃ -- 3℃-- 4℃-- 5℃-- 6℃--7℃-- 8℃-- OF-- 2℃
The fridge is not cooling under the "OF" status.
★Smart
Under the "Smart" status, it is 5℃ in the refrigerator compartment and -18℃ in the freezer compartment.
Pressing the "function" button until the Smart icon flashes, then click "OK" button to enter the Smart
function, and the light will be on.
Pressing the "function" button until the Smart icon flashes, then click "OK" button to quit this function and
the light will be off.
Under the fast freeze function, the refrigerator will quit Smart function.
★Fast freeze
With this function, the food in the freezer compartment will get cold fast. Under fast freezing function, the
temperature of freezer is -32℃。
Pressing the "function" button until the fast freeze icon flashes, then click "OK" button to enter the fast
freeze function, and the light will be on.
Pressing the "function" button until the fast freeze icon flashes, then click "OK" button to quit this function
and the light will be off.
When the set time is up, fast freeze will automatically stop and the light is off.
Under the Smart function, the refrigerator will quit fast freeze function
★Power off memory
When power off, refrigerator can remember the its setting before power off and after power on, it will
resume the former setting,
★Delay on start up
To avoid the harmful that is caused by power off and power on suddenly to refrigerator, there is a special
function on product that if the power off time shorter than 5 minutes, the refrigerator won't start up at
5