Complete The Installation - Kohler K-T194 Guia De Instalacion

Adjust the Water Temperature (cont.)
Turn the indexer, disc, valve stem clockwise until the desired
cooler water temperature is achieved. Reinstall the indexer and
disc to the valve, making sure the disc is snapped fully into the
indexer.
Turn off the water. Reinstall the cap escutcheon and handle.

4. Complete the Installation

Turn the faucet handle off.
Turn on the water supplies and check the installation for leaks.
Repair as needed.
Remove the aerator.
Open the valve and run water through the spout for about a
minute to remove any debris. Check for leaks.
Remove all debris from the aerator.
Turn the valves off, and reinstall the aerator.
Kohler Co. 5 1016743-2-B