Complete The Installation - Kohler Anthem K-28209-NA Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6. Complete the Installation

Digital
Control
Ports
Channel
NOTICE: Do not plug in the power cord until all digital control cables are connected.
IMPORTANT! Make drip loops in all cables and cords.
Route the digital control cable(s) in the wall from the valve location to the digital control installation location(s).
If not already installed, install the digital control(s) according to the instructions packed with the product.
Remove the cover to connect the digital control cable(s) to the valve. Verify that the wires are routed through the wire
channel to prevent pinching the wires.
Replace the cover.
Plug the power cord into the valve.
Verify that there is power to the 120 V GFCI electrical outlet.
Plug the power cord into the electrical outlet.
Kohler Co.
Drip
Loop
13
1430527-2-A

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Anthem k-28209

Tabla de contenido