Before Calling For Service - mabe SME26N5XNBBP0 Instructivo

before calling for service

steps for troubleshooting
Save time and money! First review the boxes in these next few pages and
maybe you won't have to call for service.
problem possible causes
The dryer won't The dryer is disconnected
turn on
Blown fuse / circuit breaker
tripped
The dryer does not Blown fuse/ circuit breaker
generate heat tripped, the drum can spin
bur it does not heat up
The gas line is closed
For the dryer's circuit, there
must be 2 house fuses. If one
of the fuses is blown, the drum
can turn but the heater will not
work.
The dryer does not have
si cient air supply to
maintain the pilot light (gas
models)
The LP gas supply tank is
empty or there is a
discruption in the natural gas
supply network (gas models)
The dryer shakes
Some shaking and noise is
or makes noise normal. The dryer may be
seated unevenly
Greasy stains on Inappropriate use of fabric
the clothing softener
You are drying dirty articles
together with clean ones
The clothing was not completely
clean
what to do
Make sure the dryer plug is completely
in the outlet.
Check the fuse box or circuit breaker of
the house and replace the fuse or
restart the breackers. note: Most of the
electric dryers use two fuses or breakers.
Check the fuse box or circuit breaker of
the house and replace the fuse or
restart the breakers.
Make sure the dryer's control valve and
the main valve are completely open.
Replace the fuse.
Consult the installation instructions.
Fill or replace the tank. The dryer should
heat when the gas network supply it
reestablished.
Move the dryer to an even surface, or
adjust the leveling feet as necessary
until even.
Follow the instructions on the fabric
softener packaging.
Only use your dryer to dry clena articles,
Dirty articles can stain your clean ones or
the dryer itself.
Sometimes stains that you cannot see
when the clothes are west show up after
drying. Use the appropriate wash
procedures before drying.
11