System Connections; Eco Button - Sharp XL-LS701H Manual De Manejo

System connections

Make sure to unplug the AC power lead before making any connections.
Installing the
supplied FM
aerial
Right speaker
■ Aerial connection
Supplied FM aerial:
Connect to the FM 75 ohms socket and position it where
reception is best.
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for
better reception. Disconnect the supplied FM aerial wire
before use.
Note:
Keep the aerial away from the unit or AC power lead to
avoid noise pickup.
■ Speaker connection
+ speaker terminal
red wire
- speaker terminal black wire
● Use speakers with an impedance of 6 ohms or more,
as lower impedance speakers can damage the unit.
● Do not mistake the right and the left channels. The
right speaker is the one on the right side when you
face the unit.
● Do not let the bare speaker
wires touch each other.
● Do not allow any objects to fall
into or to be placed in the bass
reflex ducts.
● Do not stand or sit on the
speakers. You may be injured.
All manuals and user guides at all-guides.com
FM
aerial
Wall socket
(AC 100 - 240 V
~ 50/60 Hz)
● The first time the unit is plugged in, it will enter the
● To cancel the Eco mode, press the ECO button (re-
● To return to the Eco mode, press the ECO button again.
After all connections have been made correctly, plug the
AC power lead into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
Incorrect
E-4
■ Eco mode
Eco mode.
mote control) during power standby mode. The unit will
enter the Demo mode.
■ AC power connection
Red
Black
To left
speaker