IRUDEK ECO SEKURALT Manual De Instrucciones página 11

under the guarantee. Repairs of replacements of the damaged parts are the responsibility
of the client. The appliance must be stored in a dry place free from humidity.
After use, replace the stretcher inside its container, in order to prevent it from potential
decays caused by elevated exposure to ultra-violet rays.
4.2 Preparation
On receiving the product:
• Remove the packing and display the material so that all is visible.
• Check that all the components/pieces on the accompanying list are present.
.
NOTE: The appliance must be checked before every use so as to reveal any
working abnormalities and/or damage caused by transport and/or storage.
4.3. Functioning
The use of the device must take place as described hereafter:
(A)To unroll the stratcher and lay flat
a) Remove the device from pack and place on the ground
b) Unfasten retainer strap
c) Step on foot end of the stretcher, and unroll completely to opposite end.
d) Before starting the rescue operation, bend the stretcher in half and back roll. Repeat
with opposite end of stretcher. The device will now lay flat.
(B) How to place a patient
1.- Method 1
a) Place the device next to patient. Ensure head end of
stretcher is adjacent to head of patient. Place cross straps
under the stretcher.
b) Place the patient and slide the stretcher under the
patient as far as possible. Gently roll patient down on the
stretcher.
c) Slide patient to centre of the stretcher. Be sure to keep spinal column as straight as
possible.
d) Pull straps out from under the stretcher and fasten to buckles.
2.- Method 2
a) Position foot end of the stretcher at the head