Product Description; Use And Operation - Klarstein 10029643 Manual Del Usuario

1 Handle
2 Shelf
3 Glass
Before first Use
• Remove the exterior and interior packing
• Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will
reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded. To level
your appliance, adjust the front legs at the bottom of the appliance.
• Foe recedes installation away from direct sunlight and sources of heat (stove, heater, radiator, etc.).Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold
or hot ambient temperatures may also cause the appliances not to perform properly.
• Not designed for placement in adage or basement.
• The appliance is for indoor use only.
7

Product Description

4 Foot
5 Lower hinge
6 Fan mask

Use and Operation

7 Display
8 Temperature UP
9 Temperature DOWN
10 Light
11 Door frame
12 Upper hinge