RIDGID RE 6 Manual De Instrucciones página 7

the RIDGID ® QuickChange System™ (QCS™) Coupling
that allows the installation and use of a variety of inter-
changeable heads.
The RE 600 series of Electrical Tools have dedicated
(non-interchangeable) heads.
All heads (both interchangeable and dedicated) can be
rotated 360 degrees for better access in tight spaces.
When operated, an internal electric motor powers a
hydraulic pump which supplies fluid to the cylinder of the
tool, moving the ram forward and applying force to spe-
cially designed tool heads.
The tools come with two (2) fabric loops that can be
used with appropriate attachments such as shoulder
straps or tie off lanyards.
The tools are equipped with a bright work light that turns
on when the run switch is depressed.This allows the
user to easily illuminate the work area.
The tool status lights indicate the tool's status (tool
ON/OFF, temperature out of range, service required, etc.).
See specific head instructions for specifications and other
information.
QCS Type
Label
QCS Sleeve
LED
Pressure
Work
Release
Light
Run
Button
Switch
Warning Labels
Figure 1 – RE 6/RE 60 - Use QCS Coupling for head
attachment
Control Marking
On/Off Button
Run Switch
Pressure
Release Button
QCS Sleeve
Figure 5 – Controls Chart
999-999-463.08_REV. G
Fabric Loop
Battery
Description
I/O Main tool power switch (I = On, O = Off).
— Depress to advance tool ram. In most cases, hold until ram automatically retracts.
— Allows tool ram retracted prior to automatic retraction. Primarily used with Punch Heads. If
used with a crimp head, crimp is NOT complete and must be repeated.
— Used to retract QCS balls and change heads.
RE 6/RE 60/RE 600 Electrical Tools
Type Label
LED Work
Light Run
Switch
Warning Labels
Figure 2 – RE 600 Series Dedicated Head Tools
Figure 3 – Tool Status Lights
Figure 4 – Machine Serial Number - The first 4 digits (cir-
cled) indicate the year and month of manufac-
ture. (12 = year, 06 = month).
Loop
Pressure
Release
Button
Battery
LED
ON/OFF
Button
5